Mustang Instrument Clusters
Mustang Gauge Clusters
1994 - 2004

Standard 4 Gauge Cluster Large Price: $580.00 Part # C-494L Black housing This is a (4) gauge unit, with a 3 3/8 " Speedometer & Tachometer and a 2-5/8 " Voltmeter & Fuel Level. Comes with indicator lights for turn signals (green) and Hi beam (blue). All clusters are fully assembled, pre-wired with labels and tested. Complete installation instructions are included.	Standard 4 Gauge Cluster Small Price: $570.00 Part # C-494S Black housing This is a (4) gauge unit, with a 3 3/8 " Speedometer & Tachometer and a 2-1/16 " Voltmeter & Fuel Level. Comes with indicator lights for turn signals (green) and Hi beam (blue). All clusters are fully assembled, pre-wired with labels and tested. Complete installation instructions are included.
Standard 6 Gauge Cluster Price: $775.00 Part # C-694 Black housing Priced with Standard gauge series see notes above. This is a (6) gauge unit, with a 3 3/8 " Electric Speedometer & Tachometer and a 2-1/16 " Voltmeter, Fuel Level, Oil Pressure and Water Temperature gauge. Comes with indicator lights for turn signals (green) and Hi beam (blue). All clusters are fully assembled, pre-wired with labels and tested. Complete installation instructions are included.	For pricing on all non-standard gauge series built clusters. Example: Cobalt, Carbon Fiber, GS, NV, C2, Phantom II, Ultra-Lite II, Sport-Comp II, ES, Nexus Please Call (954) 966-5523 M-F 1-6 pm EST
Custom Gauge Cluster Price: Varies Part # C-494C Custom cut units are available. These are the "made to order" customer specific one off units.. Custom one off units are not returnable.	Other Pricing Undrilled Blank Cluster Housings. $ 105.00 Drilled Cluster Housings............... $ 145.00 Custom Drilled Cluster Housings.. $ 155.00 Note: The 1999-2004 Instrument Clusters  can be used in both Street and Race cars.   Special Note:  What has been and currently is the problem for the 99-04 Instrument Clusters is,when the factory cluster is removed the car will not run. This is due to the Passive Anti-Theft System(PATS). To turn this system off you will need to contact a shop or tuner who can use a system such as SCT etc. who can do this operation. Once PATS is turned off you may install our Instrument Clusters.

Special Notes:

• Autometer Bezels : If you are now using the Autometer bezel with the 2 1/16 " gauge holes we can custom prepare our Instrument Cluster housings to accommodate this piece. Please let us know this information when you place your order.

Price:
an empty drilled housing- $ 145.00
To modify our instrument cluster housings to accommodate the Auto Meter bezel, we charge an additional $15.00.
   ( Example: Drilled housing- $145 + $15.00 = $160.00 )

• The largest size tachometers that will fit in our cluster housings are the 3 3/8 " gauges. The 5 " tachs will not fit at all.
• When ordering a complete built Instrument Cluster, be sure to specify the gauge series of your choice. Example (Phantom, Cobalt, Ultra-Lite Pro-Comp, Carbon Fiber etc.).
• Vehicle Speed Senders (VSS): The 94 on up Instrument Clusters will utilize the stock VSS units. This applies to Mustangs that are operating with the factory-installed transmissions. If you are using anything else please specify this when ordering.
• Check Engine Lights (MIL): If you want to retain your factory check engine light, we can install a red light for this monitoring. This light is an additional $ 5.00 and can be positioned where you specify.

Part #: CDE-494L	Part #: CDE-494S	Part #: C-494L Ultra-Lite
Part #: C-494S Phantom	Part #: C-494L Carbon Fiber	Part #: C-494L Ultra-Lite (with Amber shift light)
Part #: C-594 Ultra Lite		Part #: C-494L Sport Comp

Sample Configurations

We can cut many custom configurations, there can be be (1) gauge or many gauges. Call with your ideas or let us help you design a unique panel.