Brushed Aluminum >>

Carbon Fiber-gloss >>

Carbon Fiber-matte >>

 C-687SE BA - Carbon Fiber series gauges
in a Brushed Aluminum Housing

• This unit replaces the factory Ford Instrument Cluster.
• The 1987-1993 Instrument Cluster comes as a one-piece unit.
• The Instrument Cluster comes pre-built, assembled and fully wired.
• Turn signal and hi-beam lights are included.
• Complete installation instructions and needed hardware are included.
• Standard gauge clusters consist of AutoMeter's Phantom, Sport-Comp or a combination of Sport-Comp / Pro-Comp* series gauges. 
   Note: AutoMeter does not offer 2 1/16" gauges or a 3 3/8" Electrical Speedometer in the Pro-Comp series.
• Prices of other gauges (Ultra-Lite, Cobalt, Phantom II, Carbon fiber, etc...) will vary.
• For more information about the actual wiring and connecting of our built Instrument Clusters to your Mustang, please read all the FAQ's, especially the one pertaining to the Alternator.
• These are not Plug-N-Play units, wiring to vehicle is needed.

Standard 6 Gauge Cluster
C-687SE




Part # C-687SE
Electrical: $675.00

SE

 Denotes Electrical
Water Temperature
and oil pressure gauges.

C-687SE

• This is a (6) gauge unit in a black high temperature UV stable ABS cluster housing.
• It comes with indicator lights for turn signals (green) and Hi beam (blue).
• All clusters are fully assembled, pre-wired, labeled and tested.
• Included in each kit will be all the necessary hardware for the installation.
• New water temperature and oil pressure senders come with the cluster.
• These senders must be used as they are supplied by AutoMeter for their gauges.
  

      Gauges used in our standard Instrument Cluster:

• 3 3/8" Mechanical Speedometer (120 mph or 160 mph)
• 3 3/8" Tachometer  (10,000 rpm)
• 2 1/16" Fuel level (16 - 158 ohm)
• 2 1/16" Water temperature (100-250 F)  * (electric gauge)
• 2 1/16" Oil Pressure (0-100 psi) )  * (electric gauge)
• 2 1/16" Voltmeter (8-18 volts)
  
  Note: The 2 1/16" gauges are all short sweep and Air core units.
  
  

  The patented air core meter movement provides the durability and accuracy that you expect from the AutoMeter name.

Standard 6 Gauge Cluster
C-687SM

Part # C-687SM
Mechanical:$700.00

SM

 Denotes Mechanical
Water Temperature
and oil pressure gauges.

C-687SM

• This is a (6) gauge unit in a black high temperature UV stable ABS cluster housing.
• It comes with indicator lights for turn signals (green) and Hi beam (blue).
• All clusters are fully assembled, pre-wired, labeled and tested.
• Included in each kit will be all the necessary hardware for the installation.
  

      Gauges used in our standard Instrument Cluster:

• 3 3/8" Mechanical Speedometer (120 mph or 160 mph)
• 3 3/8" Tachometer  (10,000 rpm)
• 2 1/16" Fuel level (16 - 158 ohm)
• 2 1/16" Water temperature (120-240 F)  * (mechanical gauge)
• 2 1/16" Oil Pressure (0-100 psi) )  * (mechanical gauge)
• 2 1/16" Voltmeter (8-18 volts)
  
  Note: The 2 1/16" Fuel level and voltmeter gauges are short sweep and Air core units.
           The 2 1/16" water temperature and oil pressure gauges are full sweep mechanical. 
  
  

  The patented air core meter movement provides the durability and accuracy that you expect from the AutoMeter name.
  Mechanical movements provide accuracy and durability even in the harshest environments.

Standard 4 Gauge Cluster
C-487 L




Part # C-487 L
Electrical: $

L

 Denotes the fuel
level and voltmeter 
are 2 5/8 " gauges.

C-487 L

• This is a (4) gauge unit in a black high temperature UV stable ABS cluster housing.
• It comes with indicator lights for turn signals (green) and Hi beam (blue).
• All clusters are fully assembled, pre-wired, labeled and tested.
• Included in each kit will be all the necessary hardware for the installation.
  

      Gauges used in our standard Instrument Cluster:

• 3 3/8" Mechanical Speedometer (120 mph or 160 mph)
• 3 3/8" Tachometer  (10,000 rpm)
• 2 5/8" Fuel level (16 - 158 ohm)
• 2 5/8" Voltmeter (8-18 volts)
  

          Note: The 2 5/8" gauges are all short sweep and Air core units.
          The patented air core meter movement provides the durability and accuracy that you expect from the AutoMeter name.

Custom Clusters

• Custom Clusters are customer specific units. 
• These are the made to order, one off units that are not the standard configured Instrument Clusters.
• With all the different brands and types of gauges that are available the possibilities are endless. Pricing is per each individual Instrument Cluster and will vary according to specific layouts and parts.
• To discuss these types of projects please call and find out what is available and what is realistc. Not all configurations can be made. See Specific notes below.
• Special note : Custom one off units are not returnable.

Specific Notes

• The largest size Tachometers and Speedometers that will fit into the 94-04 cluster housings are the 3-3/8" gauges. The 5" Tachometers will not fit at all.
  
  
• When ordering a completely built instrument cluster, be sure to specify the gauge series of your choice. (Phantom, Ultra-Lite, Sport-Comp, etc...)
  
  
• Check Engine Light (MIL's): If you want or need to retain your factory check engine light, we offer a red light for this purpose. The location is up to you, your choice - $6.00 each.
  
  
• We also offer Blue and Green lights. These can be used for various needs.$6.00 per light and $5.00 each for positioning and mounting (total: $11.00).
   
  
• Shift light: We offer a red shift light as well as shift light kits. The kits come complete with a red light and all the pieces to trigger the light.  Price: $145.00
  
  
• Vehicle Speed Senders (VSS): The 94 on up Instrument Clusters will utilize the stock VSS units. This applies to Mustangs that are operating with the factory-installed transmissions. If you are using anything else please specify this when ordering.
  
  
• GPS modules are also available to trigger and operate the electric programmable speedometers (please ask us more about the use and price).